Diagnostics and repair
Provide exact machine identity, controller, alarm code, symptoms, recent changes, and production impact.
Request machine serviceMachine service and support
Press Brake Hydraulic Repair
Identify the machine, issue, location, production impact, parts need, installation requirement, training need, or warranty question.
Diagnose pressure, flow, temperature, contamination and motion
Press-brake hydraulic faults can involve oil condition, reservoir level, filters, pump, motor, coupling, relief valve, proportional or servo valves, manifold, cylinders, seals, hoses, accumulators, cooling and controller commands.
Common symptoms
- No pressure, low pressure, slow approach or return, hesitation, drift or uneven ram motion.
- Excessive heat, noise, cavitation, foaming, leaks, contamination or repeated filter alarms.
- Y1/Y2 synchronization or angle problems linked to hydraulic response.
- Pump, motor, valve, pressure-sensor, temperature-sensor or electrical-control faults.
Information to provide
Send machine identity, oil type and age, filter history, operating temperature, measured pressure at approved points, alarm codes, leak location, sound/video and whether the issue changes with warm-up, load or direction.
Do not work beneath an unsupported ram, loosen pressurized fittings, bypass safeguarding, adjust relief or proportional valves without approved procedure, or use unverified oil and filters.
Service pathway
Identify the machine, issue, location, and required next step
Parts and consumables
Provide model, serial number, part number, labels, connectors, quantity, shipping ZIP, and required timing.
Request machine partsInstallation and training
Review site readiness, unloading, placement, connections, startup, acceptance, operator preparation, and follow-up.
Review installation planningNext step