{"title":"Home page","description":null,"products":[{"product_id":"5x10-open-3kw-fiber-laser","title":"UmproTech 3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp class=\"ump-answer\"\u003e\u003cstrong\u003eDirect answer:\u003c\/strong\u003e The UmproTech 3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine is a sheet fiber laser cutting machine for flat-sheet metal cutting in production fabrication shops, supplied to U.S. buyers by UmproTech. This listing is the 3 kW laser power and 5′ × 10′ table size configuration. It is quoted per project — send your material, thickness in inches, part sizes, production volume and delivery ZIP code and you get a written quote covering the machine, freight, unloading, startup and training.\u003c\/p\u003e\n\u003ch2\u003eWho this fiber laser cutting machine is for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eJob shops\u003c\/li\u003e\n\u003cli\u003eOEM fabricators\u003c\/li\u003e\n\u003cli\u003eTrailer and equipment builders\u003c\/li\u003e\n\u003cli\u003eShops replacing plasma or CO2 cutting\u003c\/li\u003e\n\u003cli\u003eSchools and training programs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBracket and gusset production\u003c\/li\u003e\n\u003cli\u003eEnclosure and cabinet panels\u003c\/li\u003e\n\u003cli\u003eSignage and decorative panels\u003c\/li\u003e\n\u003cli\u003eIn-house part production instead of outsourcing\u003c\/li\u003e\n\u003cli\u003ePrototype plus short-run production on one table\u003c\/li\u003e\n\u003cli\u003eFlat sheet cutting in mild steel, stainless and aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications and what is confirmed at quote\u003c\/h2\u003e\n\u003cp\u003eValues in the first block are part of this model's configuration, stated in U.S. units. Anything marked \u003cem\u003eQuote review\u003c\/em\u003e is deliberately not published as a number — it depends on your parts, your building and your freight, and a made-up figure would only waste your time.\u003c\/p\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eValue\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSource\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser power\u003c\/th\u003e\n\u003ctd\u003e3 kW\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eModel configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTable size\u003c\/th\u003e\n\u003ctd\u003e5′ × 10′\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eModel configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting \/ forming capacity\u003c\/th\u003e\n\u003ctd\u003eConfirmed by application review — send material and thickness in inches\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine dimensions\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed in inches and feet before order\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine weight\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed in lb — needed for freight class and rigging\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical requirement\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed: voltage, phase and available amperage. U.S. service is 60 Hz\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired air pressure\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed in PSI\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAirflow requirement\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed in CFM\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLead time\u003c\/th\u003e\n\u003ctd\u003eTo be confirmed at quote\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWarranty term\u003c\/th\u003e\n\u003ctd\u003eConfirmed in writing on the quote\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrice\u003c\/th\u003e\n\u003ctd\u003eRequest for quote — configured per project\u003c\/td\u003e\n\u003ctd class=\"ump-src\"\u003eQuote review\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eCompare with the other models in this range\u003c\/h2\u003e\n\u003cp\u003eSame family, different capacity. If your parts sit near the edge of one of these, send the parts and we will tell you which model actually fits rather than selling you up by default. See the full \u003ca href=\"\/collections\/sheet-fiber-laser-cutter\"\u003esheet fiber laser cutter range\u003c\/a\u003e.\u003c\/p\u003e\n\u003ctable class=\"ump-compare\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eModel\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eLaser power\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/2kw-4x8-single-phase-fiber-laser-cutting-machine\"\u003e2kW 4′ × 8′ Single-Phase Fiber Laser Cutting Machine\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaser power: 2 kW; Table size: 4′ × 8′; Shop power phase: single-phase, 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/3kw-4x8-fiber-laser-cutting-machine\"\u003e3kW 4′ × 8′ Fiber Laser Cutting Machine\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaser power: 3 kW; Table size: 4′ × 8′\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine\u003c\/strong\u003e \u003cspan class=\"ump-this\"\u003e(this page)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003ctd\u003eLaser power: 3 kW; Table size: 5′ × 10′\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/3kw-5x10-sheet-and-tube-combo-fiber-laser-cutting-machine\"\u003e3kW 5′ × 10′ Sheet \u0026amp; Tube Combo Fiber Laser Cutting Machine\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaser power: 3 kW; Table size: 5′ × 10′\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/3kw-5x5-compact-fiber-laser-cutting-machine\"\u003e3kW 5′ × 5′ Compact Fiber Laser Cutting Machine\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eLaser power: 3 kW; Table size: 5′ × 5′\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eHow to compare your options\u003c\/h2\u003e\n\u003cp\u003eThe right sheet fiber laser cutter is decided by your parts, not by a spec sheet. Compare on laser power and table size, the materials and thickness you actually run, your production volume, the shop power available at the machine location, and what it takes to get the machine off the truck and running. A machine that looks cheaper often costs more once freight, rigging, utilities, tooling and training are included — so UmproTech quotes the whole project, not just the machine.\u003c\/p\u003e\n\u003ch2\u003eWhat to confirm before we quote\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial types you cut most (mild steel, stainless, aluminum, brass, copper, galvanized)\u003c\/li\u003e\n\u003cli\u003eMaximum thickness per material\u003c\/li\u003e\n\u003cli\u003eLargest sheet size you buy\u003c\/li\u003e\n\u003cli\u003eParts per shift or weekly cutting volume\u003c\/li\u003e\n\u003cli\u003eAssist gas plan: shop air, nitrogen or oxygen\u003c\/li\u003e\n\u003cli\u003eAvailable shop power at the machine location\u003c\/li\u003e\n\u003cli\u003eCeiling height and door width for placement\u003c\/li\u003e\n\u003cli\u003eForklift capacity or loading dock availability\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and business vs residential site\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSend these numbers in U.S. units\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum thickness per material in fractional inches (1\/16″, 1\/8″, 3\/16″, 1\/4″, 3\/8″, 1\/2″, 1″)\u003c\/li\u003e\n\u003cli\u003eAvailable compressed air in CFM at the required PSI\u003c\/li\u003e\n\u003cli\u003eIncoming service voltage, phase, 60 Hz confirmation and available amperage\u003c\/li\u003e\n\u003cli\u003eTarget cutting speed in IPM if you have a benchmark\u003c\/li\u003e\n\u003cli\u003eAvailable floor area in square feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDelivery, unloading and setup\u003c\/h2\u003e\n\u003cp\u003eThese machines ship on a flatbed or step-deck and are typically offloaded by forklift or crane. Confirm your ZIP code, dock or forklift capacity, door width and final placement path so freight and rigging can be quoted correctly. Tell us whether the site is a business with a dock, a business without a dock, or a residential or limited-access location, because that changes the freight quote. Crated weight in lb and crated dimensions in inches are confirmed before the truck is booked.\u003c\/p\u003e\n\u003ch2\u003ePower and utility review\u003c\/h2\u003e\n\u003cp\u003eFiber laser cutting requires a review of shop power, compressed air quality, assist-gas supply, chiller placement and fume extraction before the quote is finalized. U.S. shop service runs at 60 Hz — send a photo of your electrical panel with the incoming voltage, phase and available amperage, and any electrical work is confirmed before the order rather than discovered on delivery day.\u003c\/p\u003e\n\u003csection class=\"ump-evidence\"\u003e\n\u003ch2\u003eU.S. buyer requirements worth knowing before you order\u003c\/h2\u003e\n\u003cp\u003eThese are external rules and tax facts, not claims about this machine. Each one is sourced and dated so you can check it yourself.\u003c\/p\u003e\n\u003ch3\u003eSection 179 and bonus depreciation for 2026\u003c\/h3\u003e\n\u003cp\u003eFor tax years beginning in 2026 the Section 179 expensing limit is \u003cstrong\u003e$2,560,000\u003c\/strong\u003e, with the phase-out beginning once total equipment purchases exceed \u003cstrong\u003e$4,090,000\u003c\/strong\u003e. Bonus depreciation is at \u003cstrong\u003e100%\u003c\/strong\u003e. Both new and used qualifying equipment can be eligible, and Section 179 is applied before bonus depreciation. The deduction generally cannot exceed taxable income from the active conduct of the business, though disallowed amounts can usually be carried forward. This affects \u003cem\u003ewhen\u003c\/em\u003e in the year it makes sense to place a machine in service. UmproTech is not a tax advisor — confirm the treatment of your specific purchase with your CPA.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.section179.org\/section_179_deduction\/\" rel=\"nofollow noopener\" target=\"_blank\"\u003eSection179.org — 2026 Section 179 Deduction: Limits, Phase-Outs \u0026amp; Examples\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eANSI Z136.1 laser safety — what a U.S. shop must have in place\u003c\/h3\u003e\n\u003cp\u003eIndustrial fiber laser cutting, welding, cleaning and marking systems are normally Class 4 devices. Under ANSI Z136.1 (current edition Z136.1-2022), an organization operating Class 3B or Class 4 lasers is expected to \u003cstrong\u003edesignate a Laser Safety Officer\u003c\/strong\u003e, maintain a \u003cstrong\u003edocumented laser safety program\u003c\/strong\u003e, and establish a \u003cstrong\u003eLaser Controlled Area\u003c\/strong\u003e at each point of use. Everyone inside that area needs laser safety eyewear rated for the specific \u003cstrong\u003ewavelength and optical density\u003c\/strong\u003e of the machine — general safety glasses do not qualify — plus appropriate gloves, flame-resistant clothing and warning signage visible outside and inside the area. No certification is required for the LSO role, but the person must be trained well enough to run the program. Tell us your work-area layout and we review eyewear, barriers and signage with the machine instead of leaving it for you to discover after delivery.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.aws.org\/magazines-and-media\/welding-digest\/wd-jan-25-handheld-laser-welding-safety\/\" rel=\"nofollow noopener\" target=\"_blank\"\u003eAmerican Welding Society — Safety and Health Fact Sheet No. 46, Handheld Laser Welding (Sep 2024)\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eStainless steel and the OSHA hexavalent chromium limit\u003c\/h3\u003e\n\u003cp\u003eIf you cut, weld or grind stainless steel or other chromium-bearing alloys, the chromium oxidises to hexavalent chromium — Cr(VI) — and becomes airborne. OSHA's standard \u003cstrong\u003e29 CFR 1910.1026\u003c\/strong\u003e sets a permissible exposure limit for Cr(VI) as an \u003cstrong\u003e8-hour time-weighted average\u003c\/strong\u003e — the numeric limit is stated in the standard itself, linked below — and requires employers to use engineering and work-practice controls and to monitor workplace air where exposure is possible. In practice this is why source-capture extraction and filtration are scoped with the machine, not bolted on later. Send us every material you run — including stainless, galvanized and painted stock — so extraction is sized for the real material mix.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.osha.gov\/sites\/default\/files\/publications\/OSHA_FS-3647_WELDING.pdf\" rel=\"nofollow noopener\" target=\"_blank\"\u003eOSHA — Controlling Hazardous Fume and Gases during Welding (FS-3647) and 29 CFR 1910.1026\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eImported machines, 380V and the 50 Hz problem\u003c\/h3\u003e\n\u003cp\u003eFabrication equipment built for export is commonly wired for \u003cstrong\u003e380–415V three-phase at 50 Hz\u003c\/strong\u003e. A U.S. shop typically has 240V single-phase or 480V three-phase at \u003cstrong\u003e60 Hz\u003c\/strong\u003e — so voltage is only half the question, and frequency is the half that gets missed. The two normal routes are to \u003cstrong\u003ereplace the motor\u003c\/strong\u003e with a 230\/460V 60 Hz NEMA unit, or to keep the original motor and generate 380–415V locally with a \u003cstrong\u003erotary phase converter plus a step-up transformer\u003c\/strong\u003e; that second approach is generally practical up to roughly 20 HP using standard dry-type transformers. Send a photo of your panel with the incoming voltage, phase and available amperage, plus the machine nameplate, and this gets settled on the quote. All electrical work must be performed by a licensed electrician to your local code.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.practicalmachinist.com\/forum\/threads\/importing-german-380v-machines-to-run-on-480v-3-phase.355113\/\" rel=\"nofollow noopener\" target=\"_blank\"\u003ePractical Machinist — Importing 380V machines to run on 480V 3-phase; Industrial Monitor Direct — 380V 50 Hz on 240V single-phase\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eMachine guarding — OSHA 1910.212 applies to the machine once it is in your shop\u003c\/h3\u003e\n\u003cp\u003eOSHA's general-industry machine guarding standard, \u003cstrong\u003e29 CFR 1910.212\u003c\/strong\u003e, requires that one or more guarding methods protect operators from hazards at the \u003cstrong\u003epoint of operation\u003c\/strong\u003e — plus ingoing nip points, rotating parts, flying chips and sparks — on every machine where such a hazard exists. Where no machine-specific standard applies, the guard must be designed so the operator cannot get any part of the body into the danger zone during the operating cycle, and the guard itself must not create a new hazard. The standard names presses, shears, saws and milling machines among the equipment that typically needs point-of-operation guarding. Guarding, light curtains and interlocks are therefore quoted with the machine rather than treated as an accessory, and final compliance on your floor remains the machine owner's responsibility.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.osha.gov\/laws-regs\/regulations\/standardnumber\/1910\/1910.212\" rel=\"nofollow noopener\" target=\"_blank\"\u003eOSHA — 29 CFR 1910.212, General requirements for all machines\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch3\u003eThe question experienced buyers ask first: parts and support\u003c\/h3\u003e\n\u003cp\u003eOn U.S. manufacturing forums the recurring advice on imported equipment is not about spec sheets — it is about what happens after the sale. The test buyers are told to run is blunt: \u003cem\u003e“Can I still get parts for this model, and from where?”\u003c\/em\u003e If a seller cannot answer that clearly, treat it as a red flag. Generic components — laser sources, lenses, nozzles — are widely available; machine-specific parts are where shops get stranded, and some brands thin out on parts after about five years. So ask us the same question, in writing, before you buy: which parts are stocked in the U.S., which ship from the factory, and what the realistic lead time is on each. That answer belongs on your quote.\u003c\/p\u003e\n\u003cp class=\"ump-cite\"\u003e\u003csmall\u003eSource: \u003ca href=\"https:\/\/www.practicalmachinist.com\/forum\/threads\/cheap-fiber-lasers-technology-durability.421696\/\" rel=\"nofollow noopener\" target=\"_blank\"\u003ePractical Machinist — Cheap Fiber Lasers: technology durability; 5x10 fiber laser selection help\u003c\/a\u003e — verified 2026-07-29.\u003c\/small\u003e\u003c\/p\u003e\n\u003c\/section\u003e\n\u003ch2\u003eParts, service and what happens after the sale\u003c\/h2\u003e\n\u003cp\u003eAsk us in writing, and get it on the quote: which wear parts are stocked in the U.S., which ship from the factory, the realistic lead time on each, and who answers the phone when the machine is down. Consumable and spare-part packages can be quoted with the machine so the first failure is not also a three-week wait. Preventive maintenance intervals and a recommended shelf-stock list are part of the same conversation.\u003c\/p\u003e\n\u003ch2\u003eInstallation, startup and operator training\u003c\/h2\u003e\n\u003cp\u003eInstallation, leveling, startup and operator training can be added to the quote. Tell us how many operators need training and their current experience level so the scope is realistic. Preventive maintenance and spare-part packages can be quoted at the same time so the machine is not down waiting on a consumable.\u003c\/p\u003e\n\u003ch2\u003eFinancing review\u003c\/h2\u003e\n\u003cp\u003eEquipment financing can be reviewed alongside the quote, and machine, tooling, freight, installation and training can often be packaged into one request. Financing is a review process, not a guaranteed approval — terms and eligibility are determined by the finance provider based on your business profile. \u003cspan class=\"ump-evidence-ref\"\u003eIf the tax year matters to you, see the Section 179 note above and talk to your CPA about timing.\u003c\/span\u003e \u003ca href=\"\/pages\/equipment-financing\"\u003eStart an equipment financing review\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eRequest a quote\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSend these five items and you get a real quote instead of a price range:\u003c\/strong\u003e (1) material and maximum thickness in inches, (2) part or sheet sizes in inches or feet, (3) production volume, (4) delivery ZIP code and unloading method, (5) shop power — voltage, phase and available amperage at 60 Hz. Drawings, photos or a sample part make the review faster and the quote tighter. \u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a quote for the 3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eDo I need nitrogen or can I cut with shop air?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the material, thickness and edge quality you need. Send the materials and thicknesses you cut and we will review whether shop air, nitrogen or oxygen fits your parts and your cost per hour.\u003c\/p\u003e\n\u003ch3\u003eCan this replace my plasma table?\u003c\/h3\u003e\n\u003cp\u003eMany shops move from plasma to fiber laser for thinner material, tighter tolerance and cleaner edges. Send your current part mix and thickness range and we will review whether a fiber laser covers it.\u003c\/p\u003e\n\u003ch3\u003eWhat comes in the machine package?\u003c\/h3\u003e\n\u003cp\u003ePackage contents including chiller, compressor, fume extraction, nesting software and consumables are confirmed on the quote. Tell us what you already have in the shop so we do not quote duplicates.\u003c\/p\u003e\n\u003ch3\u003eWhat shop power should I confirm?\u003c\/h3\u003e\n\u003cp\u003eConfirm your incoming service voltage, phase and available amperage at the machine location. Send a photo of your panel and we will review the requirement before the order.\u003c\/p\u003e\n\u003ch3\u003eCan I send drawings or photos for review?\u003c\/h3\u003e\n\u003cp\u003eYes, and it is the fastest way to a firm quote. Send part drawings, photos of your shop and the machine location, or a sample part.\u003c\/p\u003e\n\u003ch3\u003eWhy is there no price listed?\u003c\/h3\u003e\n\u003cp\u003eThis equipment is configured per project. Freight, tooling, utilities, installation and training all change the number, so a written quote is more useful than a list price that will not match your job.\u003c\/p\u003e\n\u003ch3\u003eWhat information do you need to quote this?\u003c\/h3\u003e\n\u003cp\u003eMaterial and maximum thickness, part or sheet sizes, production volume, delivery ZIP code, unloading method and available shop power. Drawings, photos or a sample part make the quote tighter.\u003c\/p\u003e\n\u003ch3\u003eCan it be delivered to my ZIP code?\u003c\/h3\u003e\n\u003cp\u003eYes — freight is quoted by ZIP code. Tell us whether the site is a business with a dock, a business without a dock, or a residential or limited-access location, since that changes the cost.\u003c\/p\u003e\n\u003ch2\u003eSummary\u003c\/h2\u003e\n\u003cp class=\"ump-summary\"\u003eUmproTech supplies the 3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine to U.S. fabrication buyers including job shops, OEM fabricators and trailer and equipment builders. Model-confirmed configuration — Laser power: 3 kW; Table size: 5′ × 10′. Cutting, forming and production capacity is confirmed by application review, not published as a claim. All figures on this page are stated in U.S. units. Buyers should confirm material and thickness in inches, part size, production volume, shop power at 60 Hz, delivery ZIP code and unloading method. \u003cspan class=\"ump-evidence-ref\"\u003eU.S. specifics covered on this page with sources: Section 179 treatment for 2026, ANSI Z136.1 laser safety duties, the OSHA hexavalent chromium standard for stainless, and the 380V\/50 Hz conversion question on imported machines.\u003c\/span\u003e The next step is to request a quote covering the machine, freight, unloading, installation, training and financing review.\u003c\/p\u003e\n\u003ch2\u003eRelated pages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/request-a-quote\"\u003eRequest a fiber laser quote\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/fiber-laser-accessories\"\u003eFiber laser consumables and accessories\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/air-compressors\"\u003eFiber laser air compressor packages\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/fume-extraction\"\u003eFume extraction systems\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/equipment-financing\"\u003eEquipment financing review\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@graph\": [{\"@type\": \"Organization\", \"@id\": \"https:\/\/umprotech.com\/#organization\", \"name\": \"UmproTech\", \"url\": \"https:\/\/umprotech.com\", \"areaServed\": {\"@type\": \"Country\", \"name\": \"United States\"}, \"contactPoint\": {\"@type\": \"ContactPoint\", \"contactType\": \"sales\", \"areaServed\": \"US\", \"availableLanguage\": \"en\"}}, {\"@type\": \"Product\", \"@id\": \"https:\/\/umprotech.com\/products\/5x10-open-3kw-fiber-laser#product\", \"name\": \"UmproTech 3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine\", \"url\": \"https:\/\/umprotech.com\/products\/5x10-open-3kw-fiber-laser\", \"category\": \"Sheet Fiber Laser Cutter\", \"brand\": {\"@type\": \"Brand\", \"name\": \"UmproTech\"}, \"manufacturer\": {\"@id\": \"https:\/\/umprotech.com\/#organization\"}, \"description\": \"3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine supplied to U.S. fabrication buyers by UmproTech. Quoted per project after application, delivery and power review.\", \"mpn\": \"UMP-FLC-003\", \"additionalProperty\": [{\"@type\": \"PropertyValue\", \"name\": \"Laser power\", \"value\": \"3 kW\"}, {\"@type\": \"PropertyValue\", \"name\": \"Table size\", \"value\": \"5′ × 10′\"}]}, {\"@type\": \"BreadcrumbList\", \"itemListElement\": [{\"@type\": \"ListItem\", \"position\": 1, \"name\": \"Home\", \"item\": \"https:\/\/umprotech.com\"}, {\"@type\": \"ListItem\", \"position\": 2, \"name\": \"Sheet Fiber Laser Cutter\", \"item\": \"https:\/\/umprotech.com\/collections\/sheet-fiber-laser-cutter\"}, {\"@type\": \"ListItem\", \"position\": 3, \"name\": \"3kW 5′ × 10′ Open-Table Fiber Laser Cutting Machine\", \"item\": \"https:\/\/umprotech.com\/products\/5x10-open-3kw-fiber-laser\"}]}, {\"@type\": \"FAQPage\", \"@id\": \"https:\/\/umprotech.com\/products\/5x10-open-3kw-fiber-laser#faq\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Do I need nitrogen or can I cut with shop air?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It depends on the material, thickness and edge quality you need. Send the materials and thicknesses you cut and we will review whether shop air, nitrogen or oxygen fits your parts and your cost per hour.\"}}, {\"@type\": \"Question\", \"name\": \"Can this replace my plasma table?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Many shops move from plasma to fiber laser for thinner material, tighter tolerance and cleaner edges. Send your current part mix and thickness range and we will review whether a fiber laser covers it.\"}}, {\"@type\": \"Question\", \"name\": \"What comes in the machine package?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Package contents including chiller, compressor, fume extraction, nesting software and consumables are confirmed on the quote. Tell us what you already have in the shop so we do not quote duplicates.\"}}, {\"@type\": \"Question\", \"name\": \"What shop power should I confirm?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Confirm your incoming service voltage, phase and available amperage at the machine location. Send a photo of your panel and we will review the requirement before the order.\"}}, {\"@type\": \"Question\", \"name\": \"Can I send drawings or photos for review?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes, and it is the fastest way to a firm quote. Send part drawings, photos of your shop and the machine location, or a sample part.\"}}, {\"@type\": \"Question\", \"name\": \"Why is there no price listed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"This equipment is configured per project. Freight, tooling, utilities, installation and training all change the number, so a written quote is more useful than a list price that will not match your job.\"}}, {\"@type\": \"Question\", \"name\": \"What information do you need to quote this?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Material and maximum thickness, part or sheet sizes, production volume, delivery ZIP code, unloading method and available shop power. Drawings, photos or a sample part make the quote tighter.\"}}, {\"@type\": \"Question\", \"name\": \"Can it be delivered to my ZIP code?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes — freight is quoted by ZIP code. Tell us whether the site is a business with a dock, a business without a dock, or a residential or limited-access location, since that changes the cost.\"}}]}]}\u003c\/script\u003e","brand":"UmproTech","offers":[{"title":"Default Title","offer_id":42948345921611,"sku":"SKU-UMP-FLC-003","price":119900.0,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/umpro-tech.com\/collections\/frontpage.oembed","provider":"My Store","version":"1.0","type":"link"}