{"title":"Fiber Laser Retrofit \u0026 Modernization Services","description":"\u003cp\u003eExplore UmproTech fiber laser retrofit \u0026amp; modernization services for industrial CNC machines across the United States. Request an engineering review and project quote.\u003c\/p\u003e","products":[{"product_id":"fiber-laser-source-replacement-power-upgrade-service","title":"Fiber Laser Source Replacement \u0026 Power Upgrade Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the laser source of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser source compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling and communication checks\u003c\/li\u003e\n\u003cli\u003eSource installation and controller integration\u003c\/li\u003e\n\u003cli\u003eCutting parameter setup and test cuts\u003c\/li\u003e\n\u003cli\u003eStartup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus \/ MAX \/ JPT \/ IPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957085868107,"sku":"UM-RFL-SRC-001","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-source-replacement-power-upgrade-service-8723268.png?v=1786904709"},{"product_id":"fiber-laser-cutting-head-replacement-upgrade","title":"Fiber Laser Cutting Head Replacement \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the cutting head on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting head compatibility review\u003c\/li\u003e\n\u003cli\u003eAutofocus and capacitive height-control integration\u003c\/li\u003e\n\u003cli\u003eOptics, nozzle and ceramic setup\u003c\/li\u003e\n\u003cli\u003eController communication and parameter configuration\u003c\/li\u003e\n\u003cli\u003eAlignment and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines where cut quality is limited by the head rather than by the source\u003c\/li\u003e\n\u003cli\u003eOwners with crash damage who need a compatibility route rather than a new machine\u003c\/li\u003e\n\u003cli\u003eShops standardizing head and consumable stock across several fiber lasers\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an obsolete or undocumented head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead model and mounting\u003c\/th\u003e\n\u003ctd\u003eExisting head brand, model, mount pattern and Z-axis interface\u003c\/td\u003e\n\u003ctd\u003eDecides whether the retrofit is a bolt-on or a bracket and cable job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber connector\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD type and fiber diameter\u003c\/td\u003e\n\u003ctd\u003eThe head must match the source connector, not just the power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight control\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor, amplifier and controller compatibility\u003c\/td\u003e\n\u003ctd\u003eHeight control is the single most common retrofit failure point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas circuit\u003c\/th\u003e\n\u003ctd\u003eAssist-gas pressure range, valves and nozzle standard\u003c\/td\u003e\n\u003ctd\u003eA new head usually means a new nozzle and consumable standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and cooling\u003c\/th\u003e\n\u003ctd\u003eCollimation, focus length, protective window and water cooling\u003c\/td\u003e\n\u003ctd\u003eDetermines what cut range the head can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head\u003c\/th\u003e\n\u003ctd\u003eRaytools \/ Precitec \/ BOCI \/ WSX\u003c\/td\u003e\n\u003ctd\u003eIdentified from the head nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and protective windows\u003c\/th\u003e\n\u003ctd\u003ePrecitec-compatible \/ Raytools-compatible \/ WSX-compatible \/ BOCI-compatible\u003c\/td\u003e\n\u003ctd\u003eMatched to the installed head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzles and ceramic rings\u003c\/th\u003e\n\u003ctd\u003eMatched nozzle and ceramic-ring standard\u003c\/td\u003e\n\u003ctd\u003eHead-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight sensing\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor and amplifier matched to the head\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssist-gas system\u003c\/th\u003e\n\u003ctd\u003eSMC \/ AirTAC proportional control\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent cutting head brand and model, with photos from two angles\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model and power rating\u003c\/li\u003e\n\u003cli\u003eFiber connector type and a photo of the connector at the head\u003c\/li\u003e\n\u003cli\u003eHeight-control brand and controller model\u003c\/li\u003e\n\u003cli\u003ePhotographs of poor cuts, with material and thickness noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrash damage often reaches past the head into the Z-axis and drag chain\u003c\/li\u003e\n\u003cli\u003eA head upgrade does not compensate for a worn gantry, loose rack or a failing source\u003c\/li\u003e\n\u003cli\u003eConsumable standards change with the head — budget for a new starter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957086163019,"sku":"UM-RFL-HEAD-002","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-cutting-head-replacement-upgrade-4192916.png?v=1786904766"},{"product_id":"fiber-laser-cnc-controller-cypcut-retrofit","title":"Fiber Laser CNC Controller \u0026 CypCut Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the CypCut software and parameter set on a CNC cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eController and I\/O compatibility review\u003c\/li\u003e\n\u003cli\u003eCypCut or compatible control-system installation\u003c\/li\u003e\n\u003cli\u003eServo, height control, gas and auxiliary integration\u003c\/li\u003e\n\u003cli\u003eMachine parameter configuration\u003c\/li\u003e\n\u003cli\u003eNesting workflow setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eCypCut\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957086195787,"sku":"UM-RFL-CNC-003","price":7900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-cnc-controller-cypcut-retrofit-3143098.png?v=1786904766"},{"product_id":"fiber-laser-chiller-replacement-cooling-system-upgrade","title":"Fiber Laser Chiller Replacement \u0026 Cooling System Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCooling-load and voltage review\u003c\/li\u003e\n\u003cli\u003eChiller selection for the installed laser power\u003c\/li\u003e\n\u003cli\u003eHose, flow, alarm and communication integration\u003c\/li\u003e\n\u003cli\u003eCoolant-system flushing recommendations\u003c\/li\u003e\n\u003cli\u003eStartup and operating-temperature verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957086294091,"sku":"UM-RFL-CHILL-004","price":3900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-chiller-replacement-cooling-system-upgrade-6205073.png?v=1786904767"},{"product_id":"fiber-laser-transformer-voltage-conversion-package","title":"Fiber Laser Transformer \u0026 Voltage Conversion Package","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eFiber Laser Transformer \u0026amp; Voltage Conversion Package — independent retrofit and upgrade work carried out on the control and motion package of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIncoming power and machine-load review\u003c\/li\u003e\n\u003cli\u003eTransformer or converter sizing\u003c\/li\u003e\n\u003cli\u003eVoltage, phase, frequency and grounding requirements\u003c\/li\u003e\n\u003cli\u003eConnection diagram and installation guidance\u003c\/li\u003e\n\u003cli\u003eOptional on-site startup verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTransformer or voltage converter\u003c\/th\u003e\n\u003ctd\u003eMatched dry-type transformer or rotary\/static converter\u003c\/td\u003e\n\u003ctd\u003eSized from the connected load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection devices\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Eaton breakers and fusing\u003c\/td\u003e\n\u003ctd\u003eRated to the delivered service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eNEMA-rated enclosure matched to the installation location\u003c\/td\u003e\n\u003ctd\u003eConfirmed by site conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCables and connections\u003c\/th\u003e\n\u003ctd\u003eMatched conductors, lugs and terminations\u003c\/td\u003e\n\u003ctd\u003eSized by a licensed electrician to local code\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957086425163,"sku":"UM-RFL-PWR-005","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-transformer-voltage-conversion-package-7164624.png?v=1786904767"},{"product_id":"used-fiber-laser-inspection-upgrade-assessment","title":"Used Fiber Laser Inspection \u0026 Upgrade Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser source, cutting head and chiller condition\u003c\/li\u003e\n\u003cli\u003eCNC controller, servo, gas and electrical-system review\u003c\/li\u003e\n\u003cli\u003eMachine geometry, motion and cutting-performance observations\u003c\/li\u003e\n\u003cli\u003eObsolete component and compatibility review\u003c\/li\u003e\n\u003cli\u003eRecommended repair, replacement and upgrade roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957086523467,"sku":"UM-RFL-INS-006","price":495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/used-fiber-laser-inspection-upgrade-assessment-5076229.png?v=1786904709"},{"product_id":"fiber-laser-servo-motor-drive-system-upgrade","title":"Fiber Laser Servo Motor \u0026 Drive System Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the servo and drive package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAxis load and motor-sizing review\u003c\/li\u003e\n\u003cli\u003eServo motor, drive and cable replacement\u003c\/li\u003e\n\u003cli\u003eCNC communication and I\/O integration\u003c\/li\u003e\n\u003cli\u003eEncoder, homing and limit configuration\u003c\/li\u003e\n\u003cli\u003eAxis tuning, squareness checks and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines losing position, alarming on the drives or running hot under duty\u003c\/li\u003e\n\u003cli\u003eOwners whose motor or drive generation is no longer obtainable\u003c\/li\u003e\n\u003cli\u003eShops raising acceleration or duty cycle on existing motion hardware\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with mixed-generation drive packages\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotor and drive package\u003c\/th\u003e\n\u003ctd\u003eBrand, model, frame size, feedback type and cabling\u003c\/td\u003e\n\u003ctd\u003eFeedback type decides whether motors can be reused\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical coupling\u003c\/th\u003e\n\u003ctd\u003eGearbox ratio, coupling, belt or direct mount\u003c\/td\u003e\n\u003ctd\u003eA drive swap that ignores the mechanics gives you tuned vibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003ePulse, analog or bus protocol between control and drive\u003c\/td\u003e\n\u003ctd\u003eProtocol compatibility is the first thing that either works or does not\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLoad and duty\u003c\/th\u003e\n\u003ctd\u003eAxis mass, acceleration, duty cycle and thermal load\u003c\/td\u003e\n\u003ctd\u003eSizing on real duty avoids the classic undersized retrofit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCabinet and power\u003c\/th\u003e\n\u003ctd\u003eCabinet space, cooling, incoming supply and braking resistors\u003c\/td\u003e\n\u003ctd\u003eRegenerative loads and heat are usually underestimated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVFD and inverter options\u003c\/th\u003e\n\u003ctd\u003eDelta \/ Yaskawa \/ ABB \/ Schneider Electric\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLinear scale and position-feedback options\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale\u003c\/td\u003e\n\u003ctd\u003eConfirmed by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eMotor and drive nameplate photos for each affected axis\u003c\/li\u003e\n\u003cli\u003eControl brand, model and the interface it uses to the drives\u003c\/li\u003e\n\u003cli\u003ePhotos of the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWhat the machine does wrong now — position loss, alarms, overheating, noise\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNew drives do not fix worn ballscrews, racks or bearings\u003c\/li\u003e\n\u003cli\u003eEncoder and feedback mismatches may force motor replacement as well\u003c\/li\u003e\n\u003cli\u003eRetuning on your real parts is part of the job — budget the machine time\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091242059,"sku":"UM-RFL-SERVO-007","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-servo-motor-drive-system-upgrade-5362492.png?v=1786904706"},{"product_id":"fiber-laser-height-control-capacitive-sensor-upgrade","title":"Fiber Laser Height Control \u0026 Capacitive Sensor Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeight controller and sensor inspection\u003c\/li\u003e\n\u003cli\u003eCapacitive amplifier, cable and ceramic checks\u003c\/li\u003e\n\u003cli\u003eZ-axis interface and controller integration\u003c\/li\u003e\n\u003cli\u003eCalibration, edge-following and pierce-height setup\u003c\/li\u003e\n\u003cli\u003eTest cutting across representative materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091274827,"sku":"UM-RFL-HEIGHT-008","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-height-control-capacitive-sensor-upgrade-8520308.png?v=1786904707"},{"product_id":"fiber-laser-gas-control-automatic-pressure-upgrade","title":"Fiber Laser Gas Control \u0026 Automatic Pressure Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOxygen, nitrogen and shop-air circuit evaluation\u003c\/li\u003e\n\u003cli\u003eProportional valve and pressure-sensor upgrade\u003c\/li\u003e\n\u003cli\u003eCNC-controlled gas selection and pressure setup\u003c\/li\u003e\n\u003cli\u003eRegulator, solenoid, hose and filtration review\u003c\/li\u003e\n\u003cli\u003eLeak testing and cutting-parameter verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091307595,"sku":"UM-RFL-GAS-009","price":2900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-gas-control-automatic-pressure-upgrade-6412928.png?v=1786904766"},{"product_id":"fiber-laser-fume-extraction-dust-collector-retrofit","title":"Fiber Laser Fume Extraction \u0026 Dust Collector Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eFiber Laser Fume Extraction \u0026amp; Dust Collector Retrofit — independent retrofit and upgrade work carried out on the control and motion package of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTable size, material and cutting-volume review\u003c\/li\u003e\n\u003cli\u003eAirflow and static-pressure sizing\u003c\/li\u003e\n\u003cli\u003eDucting, zoning and damper integration\u003c\/li\u003e\n\u003cli\u003eDust collector, spark-control and filtration recommendations\u003c\/li\u003e\n\u003cli\u003eElectrical hookup and airflow verification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFilter cartridges and media\u003c\/th\u003e\n\u003ctd\u003eDonaldson \/ Nederman-compatible \/ matched cartridge\u003c\/td\u003e\n\u003ctd\u003eMatched to the unit and process\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFan and blower package\u003c\/th\u003e\n\u003ctd\u003eWEG \/ Siemens motor on a matched blower\u003c\/td\u003e\n\u003ctd\u003eSized to airflow and static pressure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController and starter\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical panel components\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDucting, hoods and dampers\u003c\/th\u003e\n\u003ctd\u003eMatched ducting, hood and damper package\u003c\/td\u003e\n\u003ctd\u003eSized from the shop layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091405899,"sku":"UM-RFL-FUME-010","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-fume-extraction-dust-collector-retrofit-7201283.png?v=1786904766"},{"product_id":"fiber-laser-safety-enclosure-interlock-upgrade","title":"Fiber Laser Safety Enclosure \u0026 Interlock Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the safety and guarding package of a production machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHazard-area and access-point review\u003c\/li\u003e\n\u003cli\u003eProtective enclosure panel and viewing-window design\u003c\/li\u003e\n\u003cli\u003eDoor interlocks, safety relays and emergency-stop integration\u003c\/li\u003e\n\u003cli\u003eWarning labels and operating-state indicators\u003c\/li\u003e\n\u003cli\u003eFunctional verification after installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose guarding no longer matches how the job is actually run\u003c\/li\u003e\n\u003cli\u003eOwners preparing for an audit or a change of ownership\u003c\/li\u003e\n\u003cli\u003ePlants integrating legacy devices into a modern safety circuit\u003c\/li\u003e\n\u003cli\u003eShops that need stop-time measurement behind their guard distances\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRisk assessment\u003c\/th\u003e\n\u003ctd\u003eExisting assessment, hazard list and required performance level\u003c\/td\u003e\n\u003ctd\u003eThe assessment decides the device class — everything else follows it\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eExisting safety devices\u003c\/th\u003e\n\u003ctd\u003eBrand, model, age and validity of the current devices\u003c\/td\u003e\n\u003ctd\u003eSome legacy devices cannot be integrated into a modern safety circuit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl interface\u003c\/th\u003e\n\u003ctd\u003eSafety relay or safety PLC, stop category and response time\u003c\/td\u003e\n\u003ctd\u003eStop time measurement decides mounting distance, which decides layout\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine stopping performance\u003c\/th\u003e\n\u003ctd\u003eMeasured stop time and overrun\u003c\/td\u003e\n\u003ctd\u003eGuard distance is calculated from measured stop time, not from a catalog\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAccess and workflow\u003c\/th\u003e\n\u003ctd\u003eLoad, unload, tooling change and maintenance access\u003c\/td\u003e\n\u003ctd\u003eGuarding that blocks the workflow gets defeated within a month\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the production machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser safety window and enclosure options\u003c\/th\u003e\n\u003ctd\u003eLaserVision \/ Kentek-class certified materials\u003c\/td\u003e\n\u003ctd\u003eRated to the delivered wavelength and power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine from every access side, and of the current guarding\u003c\/li\u003e\n\u003cli\u003eCurrent safety device brand and model\u003c\/li\u003e\n\u003cli\u003eYour existing risk assessment if you have one\u003c\/li\u003e\n\u003cli\u003eHow the operator loads, unloads and changes tooling\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFinal compliance on your floor remains the machine owner's responsibility\u003c\/li\u003e\n\u003cli\u003eStop-time measurement is part of the job — distances cannot be assumed\u003c\/li\u003e\n\u003cli\u003eGuarding that is not designed around the real workflow will be bypassed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091438667,"sku":"UM-RFL-SAFE-011","price":7900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-safety-enclosure-interlock-upgrade-8396077.png?v=1786904707"},{"product_id":"fiber-laser-rotary-tube-cutting-attachment-retrofit","title":"Fiber Laser Rotary Tube Cutting Attachment Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine bed, controller and axis-capacity review\u003c\/li\u003e\n\u003cli\u003eRotary chuck and support-system selection\u003c\/li\u003e\n\u003cli\u003eServo drive, electrical and CNC integration\u003c\/li\u003e\n\u003cli\u003eTube-cutting software and parameter setup\u003c\/li\u003e\n\u003cli\u003eAlignment, calibration and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957091536971,"sku":"UM-RFL-ROTARY-012","price":12900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/fiber-laser-rotary-tube-cutting-attachment-retrofit-3021294.png?v=1786904767"},{"product_id":"co-laser-to-fiber-conversion-feasibility-assessment","title":"CO₂ Laser-to-Fiber Conversion Feasibility Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eCO₂ Laser-to-Fiber Conversion Feasibility Assessment — independent retrofit and upgrade work carried out on the laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine frame, gantry and motion-system condition\u003c\/li\u003e\n\u003cli\u003eCNC controller, servo and electrical architecture review\u003c\/li\u003e\n\u003cli\u003eFiber source, cutting head and chiller compatibility\u003c\/li\u003e\n\u003cli\u003eGas, extraction and safety-system requirements\u003c\/li\u003e\n\u003cli\u003ePreliminary retrofit scope, risks and budget guidance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus \/ MAX \/ JPT \/ IPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957095436363,"sku":"UM-CO2-ASSESS-001","price":1500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/co2-laser-to-fiber-conversion-feasibility-assessment-6909664.png?v=1786904707"},{"product_id":"co-laser-to-fiber-laser-complete-retrofit-service","title":"CO₂ Laser to Fiber Laser Complete Retrofit Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the laser source on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber laser source, cutting head and industrial chiller\u003c\/li\u003e\n\u003cli\u003eCNC controller, height control and software integration\u003c\/li\u003e\n\u003cli\u003eServo, electrical cabinet and communication upgrades as required\u003c\/li\u003e\n\u003cli\u003eAssist-gas, extraction and safety-system modifications\u003c\/li\u003e\n\u003cli\u003eInstallation, calibration, test cutting and startup support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber laser source options\u003c\/th\u003e\n\u003ctd\u003eRaycus \/ MAX \/ JPT \/ IPG\u003c\/td\u003e\n\u003ctd\u003eQuote-selected by power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head options\u003c\/th\u003e\n\u003ctd\u003eRaytools \/ Precitec \/ BOCI \/ WSX\u003c\/td\u003e\n\u003ctd\u003ePower-matched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller options\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eSource-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess FSCUT platform (CypCut \/ HypCut) \/ Au3tech \/ Weihong\u003c\/td\u003e\n\u003ctd\u003eMatched to power class\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957095567435,"sku":"UM-CO2-FIBER-002","price":39900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/co2-laser-to-fiber-laser-complete-retrofit-service-4965906.png?v=1786904706"},{"product_id":"legacy-laser-cutting-machine-fiber-conversion-package","title":"Legacy Laser Cutting Machine Fiber Conversion Package","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the laser source on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber laser source and autofocus cutting head\u003c\/li\u003e\n\u003cli\u003eIndustrial chiller and cooling-circuit components\u003c\/li\u003e\n\u003cli\u003eCNC controller, height control and cutting software\u003c\/li\u003e\n\u003cli\u003eElectrical interface, gas-control and safety modifications\u003c\/li\u003e\n\u003cli\u003eCalibration, cutting parameters and production test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus \/ MAX \/ JPT \/ IPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957096255563,"sku":"UM-CO2-CORE-003","price":29900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/legacy-laser-cutting-machine-fiber-conversion-package-5061351.png?v=1786904706"},{"product_id":"amada-press-brake-laser-machine-retrofit-assessment","title":"Amada Press Brake \u0026 Laser Machine Retrofit Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eAmada Press Brake \u0026amp; Laser Machine Retrofit Assessment — independent retrofit and upgrade work carried out on the Amada machine control and mechanical package of a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, servo, PLC and electrical-system review\u003c\/li\u003e\n\u003cli\u003eBackgauge, ram-position, laser source, cutting head or chiller evaluation\u003c\/li\u003e\n\u003cli\u003eObsolete-parts and compatibility analysis\u003c\/li\u003e\n\u003cli\u003eSafety, utility and site-readiness observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair or modernization roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the cnc machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC control\u003c\/th\u003e\n\u003ctd\u003eAmada\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed control before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFeedback devices\u003c\/th\u003e\n\u003ctd\u003eHeidenhain \/ Givi Misure \/ Magnescale linear scales\u003c\/td\u003e\n\u003ctd\u003eMatched to axis count and travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrives and motors\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety interface\u003c\/th\u003e\n\u003ctd\u003eLazer Safe \/ DSP Fiessler \/ SICK \/ Pilz\u003c\/td\u003e\n\u003ctd\u003eScope set by risk assessment and measured stop time\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical integration\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957106610251,"sku":"UM-BRAND-AMA-006","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/amada-press-brake-laser-machine-retrofit-assessment-2004045.png?v=1786904347"},{"product_id":"trumpf-laser-cutting-machine-retrofit-upgrade-assessment","title":"Trumpf Laser Cutting Machine Retrofit \u0026 Upgrade Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Trumpf control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, servo, PLC and electrical-system review\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and assist-gas evaluation\u003c\/li\u003e\n\u003cli\u003eObsolete-parts and third-party compatibility analysis\u003c\/li\u003e\n\u003cli\u003eMotion accuracy, extraction and safety-system observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair or modernization roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eTrumpf\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957106970699,"sku":"UM-BRAND-TRU-007","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/trumpf-laser-cutting-machine-retrofit-upgrade-assessment-5792399.png?v=1786904227"},{"product_id":"bystronic-laser-cutting-machine-retrofit-upgrade","title":"Bystronic Laser Cutting Machine Retrofit \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Bystronic control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, HMI and electrical-system modernization\u003c\/li\u003e\n\u003cli\u003eServo drive, motion and positioning-system evaluation\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and gas-system review\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and software compatibility assessment\u003c\/li\u003e\n\u003cli\u003eCalibration, test cutting and recommissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eBystronic\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eTwo figures are quoted: how long the parts take, and how long the machine is out of production. The shutdown is booked once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSubmit the intake form with those details and the quotation is prepared against your application rather than a generic specification. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957107331147,"sku":"UM-BRAND-BYS-008","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/bystronic-laser-cutting-machine-retrofit-upgrade-1925982.png?v=1786904407"},{"product_id":"mazak-laser-cutting-machine-upgrade-assessment","title":"Mazak Laser Cutting Machine Upgrade Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Mazak control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, PLC, servo and electrical-system review\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, cooling and assist-gas evaluation\u003c\/li\u003e\n\u003cli\u003eMotion accuracy and obsolete-component analysis\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and software-interface observations\u003c\/li\u003e\n\u003cli\u003eRecommended repair and upgrade roadmap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eMazak\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts lead time and the production shutdown window are quoted as separate lines, and the machine is taken out of production only once parts are on hand. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend the details above and the response is a written quotation covering the equipment, freight, unloading and startup scope. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957107658827,"sku":"UM-BRAND-MAZ-009","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/mazak-laser-cutting-machine-upgrade-assessment-5810496.png?v=1786904288"},{"product_id":"mitsubishi-laser-cutting-machine-retrofit-control-upgrade","title":"Mitsubishi Laser Cutting Machine Retrofit \u0026 Control Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the Mitsubishi machine control and mechanical package on a CNC machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC control, HMI, PLC and electrical-system modernization\u003c\/li\u003e\n\u003cli\u003eServo drive, encoder and motion-system evaluation\u003c\/li\u003e\n\u003cli\u003eLaser source, cutting head, chiller and gas-system review\u003c\/li\u003e\n\u003cli\u003eExtraction, safety and obsolete-parts assessment\u003c\/li\u003e\n\u003cli\u003eCalibration, test cutting and recommissioning support\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that are mechanically sound but limited by obsolete electronics\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on equipment with service life left\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment bringing a machine to a supportable standard\u003c\/li\u003e\n\u003cli\u003ePlants standardizing controls, drives or safety systems across several machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMachine identity and condition\u003c\/th\u003e\n\u003ctd\u003eMake, model, year, hours and service history\u003c\/td\u003e\n\u003ctd\u003eSets whether the machine is worth the investment at all\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and electrical\u003c\/th\u003e\n\u003ctd\u003eControl platform, cabinet condition and documentation\u003c\/td\u003e\n\u003ctd\u003eDocumentation availability changes the labor estimate significantly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical wear\u003c\/th\u003e\n\u003ctd\u003eWays, screws, bearings, guides and squareness\u003c\/td\u003e\n\u003ctd\u003eA retrofit cannot correct worn mechanics — they get quoted first\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParts availability\u003c\/th\u003e\n\u003ctd\u003eWhich components still have a supply route\u003c\/td\u003e\n\u003ctd\u003eThis is what decides retrofit versus replace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety and compliance\u003c\/th\u003e\n\u003ctd\u003eGuarding, interlocks and stop performance\u003c\/td\u003e\n\u003ctd\u003eAny control change re-opens the guarding assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA cnc machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eMitsubishi\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive options\u003c\/th\u003e\n\u003ctd\u003eEstun \/ Yaskawa \/ Delta \/ Siemens\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHydraulic valve options\u003c\/th\u003e\n\u003ctd\u003eBosch Rexroth \/ Parker \/ HOERBIGER \/ HAWE \/ Yuken\u003c\/td\u003e\n\u003ctd\u003eCircuit-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety light curtain and interlock options\u003c\/th\u003e\n\u003ctd\u003eSICK \/ Pilz \/ Keyence \/ Banner\u003c\/td\u003e\n\u003ctd\u003eGuarding scope by risk assessment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003ePhotos of the machine, the control screen and the cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any backups you hold\u003c\/li\u003e\n\u003cli\u003eService history and known faults\u003c\/li\u003e\n\u003cli\u003eWhat you need the machine to do after the work\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRetrofit economics turn negative fast on a machine with worn mechanics\u003c\/li\u003e\n\u003cli\u003eObsolete components may have no supply route at any price\u003c\/li\u003e\n\u003cli\u003ePost-retrofit safety validation is the owner's responsibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957108445259,"sku":"UM-BRAND-MIT-010","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/mitsubishi-laser-cutting-machine-retrofit-control-upgrade-5259592.png?v=1786904288"},{"product_id":"hsg-fiber-laser-retrofit-upgrade-service","title":"HSG Fiber Laser Retrofit \u0026 Upgrade Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the HSG control and motion package on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC controller and cutting-software modernization\u003c\/li\u003e\n\u003cli\u003eFiber laser source, cutting head and chiller replacement\u003c\/li\u003e\n\u003cli\u003eServo drive, height control and gas-system upgrades\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, extraction and safety-system improvements\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eHSG\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe scope is written from these, not from the machine name:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957108904011,"sku":"UM-BRAND-HSG-011","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/hsg-fiber-laser-retrofit-upgrade-service-1997505.png?v=1786904347"},{"product_id":"bodor-fiber-laser-retrofit-upgrade-service","title":"Bodor Fiber Laser Retrofit \u0026 Upgrade Service","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Bodor control and motion package of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCNC controller and cutting-software modernization\u003c\/li\u003e\n\u003cli\u003eFiber laser source, autofocus cutting head and chiller replacement\u003c\/li\u003e\n\u003cli\u003eServo drive, height control and assist-gas upgrades\u003c\/li\u003e\n\u003cli\u003eElectrical cabinet, extraction and safety-system improvements\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines that cut acceptably but run an unsupported control or CAM version\u003c\/li\u003e\n\u003cli\u003eOwners holding a parts-obsolescence notice on the control platform\u003c\/li\u003e\n\u003cli\u003eShops standardizing nesting and control workflow across several cutting machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with no parameter backup or documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC platform and version\u003c\/th\u003e\n\u003ctd\u003eInstalled control, software version and license status\u003c\/td\u003e\n\u003ctd\u003eDecides whether a migration keeps your parameters or starts clean\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo and drive package\u003c\/th\u003e\n\u003ctd\u003eMotor and drive brand, model, feedback type and tuning data\u003c\/td\u003e\n\u003ctd\u003eMixed-generation drives are the usual reason a retrofit stalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eI\/O and cabinet layout\u003c\/th\u003e\n\u003ctd\u003eExisting wiring, terminal layout and cabinet space\u003c\/td\u003e\n\u003ctd\u003eCabinet space and wiring quality set the labor hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSafety circuit\u003c\/th\u003e\n\u003ctd\u003eE-stop chain, interlocks, guarding and light curtains\u003c\/td\u003e\n\u003ctd\u003eA control retrofit re-opens the guarding assessment — this is not optional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMechanical condition\u003c\/th\u003e\n\u003ctd\u003eRack, pinion, guides, bearings and gantry squareness\u003c\/td\u003e\n\u003ctd\u003eA new control cannot correct worn motion hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eThe assemblies below are specified while the fiber laser cutting machine is configured; the shortlist shows the options available for each.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eBodor\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eServo motor and drive options\u003c\/th\u003e\n\u003ctd\u003eYaskawa \/ Delta \/ Fuji \/ Panasonic\u003c\/td\u003e\n\u003ctd\u003eAxis-matched\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and panel component options\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003ePanel standard by build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent CNC brand, version and a photo of the control screen\u003c\/li\u003e\n\u003cli\u003ePhotos of the electrical cabinet with the door open\u003c\/li\u003e\n\u003cli\u003eWiring diagrams and any parameter backup you hold\u003c\/li\u003e\n\u003cli\u003eA description of what the machine does now and what you need it to do\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eParameter and license recovery depends on what backups exist before work starts\u003c\/li\u003e\n\u003cli\u003eWorn racks, guides and bearings must be corrected mechanically first\u003c\/li\u003e\n\u003cli\u003eSome legacy platforms have no supported migration path and are quoted as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eDowntime is quoted apart from parts lead time so the shutdown can be planned around your production rather than around procurement. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eComplete the intake with those details and the quotation is issued against your parts and your site. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957109231691,"sku":"UM-BRAND-BOD-012","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/bodor-fiber-laser-retrofit-upgrade-service-6069723.png?v=1786904346"},{"product_id":"cypcut-software-migration-backup-parameter-recovery","title":"CypCut Software Migration, Backup \u0026 Parameter Recovery","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the CypCut software and parameter set of a CNC cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCypCut configuration and machine-parameter backup\u003c\/li\u003e\n\u003cli\u003eSoftware migration to a replacement industrial computer\u003c\/li\u003e\n\u003cli\u003eController, height-control, servo and gas-setting restoration\u003c\/li\u003e\n\u003cli\u003eCutting database and nesting-workflow transfer\u003c\/li\u003e\n\u003cli\u003eFunctional checks and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a cnc cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eCypCut\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eLead time and downtime are quoted separately; the shutdown is scheduled around parts availability rather than around the order date. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eOnce those are confirmed, the quotation states the configuration, freight and installation scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957118242891,"sku":"UM-COMP-CYPCUT-004","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/cypcut-software-migration-backup-parameter-recovery-5277270.png?v=1786904286"},{"product_id":"raytools-fiber-laser-cutting-head-replacement-upgrade","title":"Raytools Fiber Laser Cutting Head Replacement \u0026 Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the Raytools cutting head of a fiber laser cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-head model and laser-power compatibility review\u003c\/li\u003e\n\u003cli\u003eAutofocus, capacitive sensing and cooling integration\u003c\/li\u003e\n\u003cli\u003eFiber connector, cable and controller-interface checks\u003c\/li\u003e\n\u003cli\u003eOptical alignment, calibration and parameter setup\u003c\/li\u003e\n\u003cli\u003eTest cutting with representative materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines where cut quality is limited by the head rather than by the source\u003c\/li\u003e\n\u003cli\u003eOwners with crash damage who need a compatibility route rather than a new machine\u003c\/li\u003e\n\u003cli\u003eShops standardizing head and consumable stock across several fiber lasers\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an obsolete or undocumented head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead model and mounting\u003c\/th\u003e\n\u003ctd\u003eExisting head brand, model, mount pattern and Z-axis interface\u003c\/td\u003e\n\u003ctd\u003eDecides whether the retrofit is a bolt-on or a bracket and cable job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber connector\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD type and fiber diameter\u003c\/td\u003e\n\u003ctd\u003eThe head must match the source connector, not just the power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight control\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor, amplifier and controller compatibility\u003c\/td\u003e\n\u003ctd\u003eHeight control is the single most common retrofit failure point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas circuit\u003c\/th\u003e\n\u003ctd\u003eAssist-gas pressure range, valves and nozzle standard\u003c\/td\u003e\n\u003ctd\u003eA new head usually means a new nozzle and consumable standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and cooling\u003c\/th\u003e\n\u003ctd\u003eCollimation, focus length, protective window and water cooling\u003c\/td\u003e\n\u003ctd\u003eDetermines what cut range the head can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head\u003c\/th\u003e\n\u003ctd\u003eRaytools\u003c\/td\u003e\n\u003ctd\u003eIdentified from the head nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and protective windows\u003c\/th\u003e\n\u003ctd\u003ePrecitec-compatible \/ Raytools-compatible \/ WSX-compatible \/ BOCI-compatible\u003c\/td\u003e\n\u003ctd\u003eMatched to the installed head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzles and ceramic rings\u003c\/th\u003e\n\u003ctd\u003eMatched nozzle and ceramic-ring standard\u003c\/td\u003e\n\u003ctd\u003eHead-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight sensing\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor and amplifier matched to the head\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssist-gas system\u003c\/th\u003e\n\u003ctd\u003eSMC \/ AirTAC proportional control\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eComponent identification comes first. Photographs of the nameplate and the open control cabinet answer most first-round questions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent cutting head brand and model, with photos from two angles\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model and power rating\u003c\/li\u003e\n\u003cli\u003eFiber connector type and a photo of the connector at the head\u003c\/li\u003e\n\u003cli\u003eHeight-control brand and controller model\u003c\/li\u003e\n\u003cli\u003ePhotographs of poor cuts, with material and thickness noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrash damage often reaches past the head into the Z-axis and drag chain\u003c\/li\u003e\n\u003cli\u003eA head upgrade does not compensate for a worn gantry, loose rack or a failing source\u003c\/li\u003e\n\u003cli\u003eConsumable standards change with the head — budget for a new starter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eLead time and downtime are quoted separately; the shutdown is scheduled around parts availability rather than around the order date. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eOnce those are confirmed, the quotation states the configuration, freight and installation scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957119389771,"sku":"UM-COMP-RAYT-005","price":4900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/raytools-fiber-laser-cutting-head-replacement-upgrade-1397635.png?v=1786904407"},{"product_id":"precitec-laser-cutting-head-retrofit-compatibility-assessment","title":"Precitec Laser Cutting Head Retrofit \u0026 Compatibility Assessment","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003ePrecitec Laser Cutting Head Retrofit \u0026amp; Compatibility Assessment — independent retrofit and upgrade work carried out on the Precitec cutting head of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCutting-head model, laser-power and fiber-interface review\u003c\/li\u003e\n\u003cli\u003eAutofocus, capacitive sensing and cooling compatibility\u003c\/li\u003e\n\u003cli\u003eController, communication and height-control integration\u003c\/li\u003e\n\u003cli\u003eMechanical mounting and optical-path evaluation\u003c\/li\u003e\n\u003cli\u003eCalibration, parameter setup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines where cut quality is limited by the head rather than by the source\u003c\/li\u003e\n\u003cli\u003eOwners with crash damage who need a compatibility route rather than a new machine\u003c\/li\u003e\n\u003cli\u003eShops standardizing head and consumable stock across several fiber lasers\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an obsolete or undocumented head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHead model and mounting\u003c\/th\u003e\n\u003ctd\u003eExisting head brand, model, mount pattern and Z-axis interface\u003c\/td\u003e\n\u003ctd\u003eDecides whether the retrofit is a bolt-on or a bracket and cable job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFiber connector\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD type and fiber diameter\u003c\/td\u003e\n\u003ctd\u003eThe head must match the source connector, not just the power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight control\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor, amplifier and controller compatibility\u003c\/td\u003e\n\u003ctd\u003eHeight control is the single most common retrofit failure point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGas circuit\u003c\/th\u003e\n\u003ctd\u003eAssist-gas pressure range, valves and nozzle standard\u003c\/td\u003e\n\u003ctd\u003eA new head usually means a new nozzle and consumable standard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and cooling\u003c\/th\u003e\n\u003ctd\u003eCollimation, focus length, protective window and water cooling\u003c\/td\u003e\n\u003ctd\u003eDetermines what cut range the head can actually deliver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCutting head\u003c\/th\u003e\n\u003ctd\u003ePrecitec\u003c\/td\u003e\n\u003ctd\u003eIdentified from the head nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOptics and protective windows\u003c\/th\u003e\n\u003ctd\u003ePrecitec-compatible \/ Raytools-compatible \/ WSX-compatible \/ BOCI-compatible\u003c\/td\u003e\n\u003ctd\u003eMatched to the installed head\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzles and ceramic rings\u003c\/th\u003e\n\u003ctd\u003eMatched nozzle and ceramic-ring standard\u003c\/td\u003e\n\u003ctd\u003eHead-specific\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHeight sensing\u003c\/th\u003e\n\u003ctd\u003eCapacitive sensor and amplifier matched to the head\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAssist-gas system\u003c\/th\u003e\n\u003ctd\u003eSMC \/ AirTAC proportional control\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eCurrent cutting head brand and model, with photos from two angles\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model and power rating\u003c\/li\u003e\n\u003cli\u003eFiber connector type and a photo of the connector at the head\u003c\/li\u003e\n\u003cli\u003eHeight-control brand and controller model\u003c\/li\u003e\n\u003cli\u003ePhotographs of poor cuts, with material and thickness noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCrash damage often reaches past the head into the Z-axis and drag chain\u003c\/li\u003e\n\u003cli\u003eA head upgrade does not compensate for a worn gantry, loose rack or a failing source\u003c\/li\u003e\n\u003cli\u003eConsumable standards change with the head — budget for a new starter set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957119848523,"sku":"UM-COMP-PREC-006","price":750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/precitec-laser-cutting-head-retrofit-compatibility-assessment-2488514.png?v=1786904288"},{"product_id":"ipg-fiber-laser-source-replacement-system-integration","title":"IPG Fiber Laser Source Replacement \u0026 System Integration","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIPG Fiber Laser Source Replacement \u0026amp; System Integration — independent retrofit and upgrade work carried out on the IPG laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling, fiber-delivery and communication checks\u003c\/li\u003e\n\u003cli\u003eSource installation and controller integration\u003c\/li\u003e\n\u003cli\u003eCutting-head and chiller compatibility verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eComponent selection on a fiber laser cutting machine is part of the configuration, not a fixed bill of materials. These are the assemblies and the options each is chosen from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eIPG\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eSend this set and the first-round questions are already answered:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eComponent lead time is confirmed in writing before the machine is released from production, and the shutdown is scheduled against it. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eProvide those details and the response states configuration, freight, unloading and startup scope in writing. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957120012363,"sku":"UM-COMP-IPG-007","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/ipg-fiber-laser-source-replacement-system-integration-4648850.png?v=1786904346"},{"product_id":"max-fiber-laser-source-replacement-power-upgrade","title":"MAX Fiber Laser Source Replacement \u0026 Power Upgrade","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eThis is an independent retrofit and upgrade service covering the MAX laser source on a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling and communication-system checks\u003c\/li\u003e\n\u003cli\u003eSource installation and controller integration\u003c\/li\u003e\n\u003cli\u003eCutting-head, chiller and fiber-connector verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eA fiber laser cutting machine is specified per assembly rather than from one fixed part number. The options below are the shortlist this configuration is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eMAX\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eThe assessment starts from your data, not from a model number:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eParts availability drives the schedule. The shutdown window is agreed separately and only after the components are confirmed in stock. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eSend those details through the intake form and the written quotation follows against your application. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957120274507,"sku":"UM-COMP-MAX-008","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/max-fiber-laser-source-replacement-power-upgrade-5620067.png?v=1786904347"},{"product_id":"raycus-fiber-laser-source-replacement-retrofit","title":"Raycus Fiber Laser Source Replacement \u0026 Retrofit","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eRaycus Fiber Laser Source Replacement \u0026amp; Retrofit — independent retrofit and upgrade work carried out on the Raycus laser source of a fiber laser cutting machine.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLaser-source model, power and interface compatibility review\u003c\/li\u003e\n\u003cli\u003eElectrical, cooling, communication and fiber-delivery checks\u003c\/li\u003e\n\u003cli\u003eSource installation and CNC integration\u003c\/li\u003e\n\u003cli\u003eCutting-head and chiller compatibility verification\u003c\/li\u003e\n\u003cli\u003eParameter setup, startup and test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachines whose motion, frame and control are sound but whose source has degraded\u003c\/li\u003e\n\u003cli\u003eOwners quoted a full machine replacement because the source is at end of life\u003c\/li\u003e\n\u003cli\u003eShops moving to a higher power class where the rest of the machine can carry it\u003c\/li\u003e\n\u003cli\u003eBuyers of used fiber lasers with an unknown or unsupported source\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSource model, serial and hours\u003c\/th\u003e\n\u003ctd\u003eNameplate, run hours, alarm history and prior repairs\u003c\/td\u003e\n\u003ctd\u003eDecides whether a rebuild, a like-for-like swap or a power upgrade is realistic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDelivery fiber and connector type\u003c\/th\u003e\n\u003ctd\u003eQBH\/QD connector, fiber length and routing\u003c\/td\u003e\n\u003ctd\u003eA mismatched connector changes the head and the cost of the job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCooling capacity\u003c\/th\u003e\n\u003ctd\u003eChiller kW, flow, water quality and hose runs\u003c\/td\u003e\n\u003ctd\u003eA higher-power source will not run on the old chiller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical service\u003c\/th\u003e\n\u003ctd\u003eVoltage, phase, amperage and cabinet space at the machine\u003c\/td\u003e\n\u003ctd\u003ePower upgrades are the most frequently under-budgeted item\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl and software\u003c\/th\u003e\n\u003ctd\u003eCNC version, parameter backup and license status\u003c\/td\u003e\n\u003ctd\u003eThe control has to talk to the new source before anything cuts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a fiber laser cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLaser source\u003c\/th\u003e\n\u003ctd\u003eRaycus\u003c\/td\u003e\n\u003ctd\u003eIdentified from the nameplate before any scope is written\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eChiller and cooling circuit\u003c\/th\u003e\n\u003ctd\u003eS\u0026amp;A (Teyu) \/ Hanli \/ Tongfei\u003c\/td\u003e\n\u003ctd\u003eMatched to the source\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical and communication interfaces\u003c\/th\u003e\n\u003ctd\u003eSchneider Electric \/ Siemens \/ Omron \/ Delta\u003c\/td\u003e\n\u003ctd\u003eConfirmed on the machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eNothing is quoted before the affected assembly is identified. Send the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and serial number\u003c\/li\u003e\n\u003cli\u003eLaser source brand, model, serial number and nameplate photo\u003c\/li\u003e\n\u003cli\u003ePhotos of the control cabinet with the door open, and of the fiber connector at the head\u003c\/li\u003e\n\u003cli\u003eAlarm codes and a short description of what the machine does now\u003c\/li\u003e\n\u003cli\u003eChiller make, model and capacity\u003c\/li\u003e\n\u003cli\u003eIncoming voltage, phase and available amperage at the machine\u003c\/li\u003e\n\u003cli\u003eDelivery ZIP code and site access for a service visit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFiber damage inside the source, contaminated end caps or prior unauthorized repairs can make a rebuild uneconomic\u003c\/li\u003e\n\u003cli\u003eA higher-power source does not raise cut capacity on its own — head, nozzle, gas, cooling and motion all have to carry the increase\u003c\/li\u003e\n\u003cli\u003eDiscontinued source models may have no parts route at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe schedule follows parts, not the order date: lead time and shutdown window appear as two separate lines on the quotation. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith that information the quotation covers configuration, freight and installation scope in one written response. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957120864331,"sku":"UM-COMP-RAYC-009","price":9900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/raycus-fiber-laser-source-replacement-retrofit-8633816.png?v=1786904347"},{"product_id":"hypcut-high-power-laser-software-migration-recovery","title":"HypCut High-Power Laser Software Migration \u0026 Recovery","description":"\u003cdiv class=\"ump-product\"\u003e\n\u003cp\u003e\u003cstrong\u003eIndependent retrofit and upgrade work on the HypCut software and parameter set of a CNC cutting machine in U.S. shops.\u003c\/strong\u003e No scope is written before a compatibility assessment of your exact machine, control, wiring and mechanical condition. Final scope, parts, timing and price are confirmed after the assessment; repair, replacement or upgrade is recommended only once the unit has been evaluated.\u003c\/p\u003e\n\u003ch2\u003ePossible upgrade scope\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMachine configuration and parameter backup\u003c\/li\u003e\n\u003cli\u003eSoftware migration to a replacement industrial computer\u003c\/li\u003e\n\u003cli\u003eController, height control, servo and gas-setting restoration\u003c\/li\u003e\n\u003cli\u003eCutting database, nesting and process-workflow transfer\u003c\/li\u003e\n\u003cli\u003eFunctional checks and representative test cutting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho this fits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShops whose nesting or control software is no longer supported on current hardware\u003c\/li\u003e\n\u003cli\u003eOwners who need parameters, recipes and post-processors carried across a migration\u003c\/li\u003e\n\u003cli\u003ePlants standardizing CAM output and machine profiles across several machines\u003c\/li\u003e\n\u003cli\u003eBuyers of used equipment with an unclear software license position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat the compatibility assessment covers\u003c\/h2\u003e\n\u003ctable class=\"ump-specs\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eItem\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhat is checked\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eWhy it decides the scope\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstalled version and license\u003c\/th\u003e\n\u003ctd\u003eSoftware build, dongle or license state and ownership\u003c\/td\u003e\n\u003ctd\u003eLicense transfer is the first thing that either works or blocks the whole job\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eParameter and recipe backup\u003c\/th\u003e\n\u003ctd\u003eWhat backups exist, and where\u003c\/td\u003e\n\u003ctd\u003eWithout a backup the cutting recipes are rebuilt from scratch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePost-processor and machine profile\u003c\/th\u003e\n\u003ctd\u003eMachine profile, post and kerf tables\u003c\/td\u003e\n\u003ctd\u003eThe post is what makes the software output usable on your machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHardware compatibility\u003c\/th\u003e\n\u003ctd\u003eControl PC, card, OS and CNC platform\u003c\/td\u003e\n\u003ctd\u003eOlder control cards frequently block a straight software upgrade\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOperator workflow\u003c\/th\u003e\n\u003ctd\u003eNesting, import formats, ERP hand-off and reporting\u003c\/td\u003e\n\u003ctd\u003eThe migration is judged on the operator workflow, not the install\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eConfiguration and component options\u003c\/h2\u003e\n\u003cp\u003eEach major assembly on a cnc cutting machine is selected at configuration. The shortlist below is what the build is drawn from.\u003c\/p\u003e\n\u003ctable class=\"ump-brands\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eAssembly\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eOptions\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHow it is selected\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eHypCut\u003c\/td\u003e\n\u003ctd\u003eConfirmed from the installed unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTube CNC and CAM control options\u003c\/th\u003e\n\u003ctd\u003eFriendess TubePro \/ Au3tech tube suite\u003c\/td\u003e\n\u003ctd\u003eMatched to tube package\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNesting and CAM software options\u003c\/th\u003e\n\u003ctd\u003eSigmaNEST \/ Lantek \/ Radan \/ Metalix\u003c\/td\u003e\n\u003ctd\u003eQuote-selected\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePLC and HMI options\u003c\/th\u003e\n\u003ctd\u003eSiemens \/ Schneider Electric \/ Delta \/ Omron\u003c\/td\u003e\n\u003ctd\u003eConfigured at build\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003csmall\u003eComponent brands are configuration-dependent and are confirmed in the written quotation. UmproTech is an independent supplier and service provider and is not affiliated with, sponsored by or endorsed by any equipment or component manufacturer named on this page. Brand names identify equipment and components only.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatibility data required\u003c\/h2\u003e\n\u003cp\u003eIdentify the unit before anything else — the following is what the assessment works from:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachine make, model, year and CNC platform\u003c\/li\u003e\n\u003cli\u003eCurrent software name, version and license or dongle details\u003c\/li\u003e\n\u003cli\u003eAny parameter, recipe or post-processor backups you hold\u003c\/li\u003e\n\u003cli\u003eScreenshots of the current control and nesting screens\u003c\/li\u003e\n\u003cli\u003eTypical part files and the formats your CAD sends\u003c\/li\u003e\n\u003cli\u003eWhat is failing today, in one paragraph\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLimits stated before the work starts\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLicense transfer is decided by the software vendor, not by UmproTech\u003c\/li\u003e\n\u003cli\u003eCutting recipes may need re-validation on your material after migration\u003c\/li\u003e\n\u003cli\u003eSome legacy control hardware cannot run current software at any price\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope and price\u003c\/h2\u003e\n\u003cp\u003eThe quotation separates parts lead time from the shutdown window, and the machine stays in production until the parts have arrived. Final configuration, compatibility, and availability are confirmed in the written quotation.\u003c\/p\u003e\n\u003ch2\u003eRequest a service assessment\u003c\/h2\u003e\n\u003cp\u003eWith those details the response is a written quotation rather than a price range. \u003ca href=\"\/pages\/request-industrial-equipment-quote?view=intake-center\u0026amp;route=service\"\u003e\u003cstrong\u003eRequest a service assessment\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"UmproTech","offers":[{"title":"Request a Quote","offer_id":42957130956875,"sku":"UM-COMP-HYP-024","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/files\/hypcut-high-power-laser-software-migration-recovery-1120245.png?v=1786904346"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/0909\/9339\/collections\/fiber-laser-retrofit-modernization-services-3738968.jpg?v=1786904060","url":"https:\/\/umpro-tech.com\/collections\/fiber-laser-retrofit-modernization-services.oembed?page=2","provider":"My Store","version":"1.0","type":"link"}